|
In this view ventilation cooling loads for upto four locations can be easily
compared. Simply choose the locations and which type of ASHRAE Climatic Data
type to compare on and a numeric and graphic display is presented. Click here to return to the Single Location Mode screen
Top Section - Location Selector and Screen ConfigurationCountry,
State/Province and City drop-down boxes are used to select a location for the
current row in the middle section.
Middle Section - Selected locations to compare
To add or change a location in the list click the row you want to edit and then
select the location from the top section.
Lower Section - Loads calculated using the ASHRAE Climatic Design values.
This section displays the resulting cooling load based on the ASHRAE Climatic Design
values for the type chosen in the "Compare On" drop down in the top section. Total, sensible and latent loads are shown both graphically and numerically. Sensible Heat Ratio is calculated and shown at the right.
The graphic for the design value that results in the highest load always occupies the full width of the graphic area.
|
